New Bagramet świder ziemny MK z przekładnią garden auger drill bit
≈ $986.90
Rzędziany7466 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 724 80...
Show
+48 724 800 805
+48 603 42...
Show
+48 603 420 260
+48 668 87...
Show
+48 668 878 368
Poland 
Poland, Solec-Zdrój
Poland, Solec-Zdrój
Poland, Słupia
Poland, Słupia
Poland, Słupia
Poland, Słupia
Poland, Słupia
Austria, Korneuburg
Croatia, Gostović
Romania, Caras-Severin
Colombia, Santander
Colombia, Santander
Germany, Oelsnitz/ V
Colombia, Santander
Netherlands, Goudriaan
€2,345
DKK 17,500
≈ $2,674
Denmark, Sjælland
- for making vertical holes in the ground up to a depth of 750 mm
- frame with gear
- drill bit to choose from (diameter: 150, 200, 250, 300, 350, 400 mm) for an extra charge
- the drill blade and the overlay of the rubbing part are made of hard-abrasive steel
- Additional equipment for an extra charge:
PTO shaft with overload clutch, which increases the durability and reliability of the transmission.
EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last
- zum Bohren vertikaler Löcher im Boden bis zu einer Tiefe von 750 mm
- Rahmen mit Getriebe
- Bohrer nach Wahl (Durchmesser: 150, 200, 250, 300, 350, 400 mm) gegen Aufpreis
- Die Bohrklinge und die Auflage des Reibteils bestehen aus hartschleifendem Stahl
- Zusätzliche Ausrüstung gegen Aufpreis:
Zapfwelle mit Überlastkupplung, was die Haltbarkeit und Zuverlässigkeit des Getriebes erhöht.
Das Angebot gilt solange der Vorrat reicht.
Bei Export ist nur der Nettopreis zu bezahlen (unter Angabe der gültigen USt.-ID Nummer).
Wir organisieren gerne Transport für Sie
- for making vertical holes in the ground up to a depth of 750 mm
- frame with gear
- drill bit to choose from (diameter: 150, 200, 250, 300, 350, 400 mm) for an extra charge
- the drill blade and the overlay of the rubbing part are made of hard-abrasive steel
- Additional equipment for an extra charge:
PTO shaft with overload clutch, which increases the durability and reliability of the transmission.
EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last
- pour les trous verticaux dans le sol jusqu'à une profondeur de 750 mm
- cadre avec transmission
- Vis en option (diamètres : 150, 200, 250, 300, 350, 400 mm) moyennant un supplément de prix
- la lame de la perceuse et le capuchon de la pièce à presser sont en acier résistant à l'usure
- Équipements additionnels :
Cardan articulé avec embrayage de surcharge pour une durabilité et une fiabilité accrues de la boîte de vitesse
*EXPORTATION: SEULEMENT LE MONTANT NET A PAYER (avec numéro de TVA valable) / TRANSPORT DANS LE MONDE ENTIER POSSIBLE à de bonnes conditions
- for making vertical holes in the ground up to a depth of 750 mm
- frame with gear
- drill bit to choose from (diameter: 150, 200, 250, 300, 350, 400 mm) for an extra charge
- the drill blade and the overlay of the rubbing part are made of hard-abrasive steel
- Additional equipment for an extra charge:
PTO shaft with overload clutch, which increases the durability and reliability of the transmission.
EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last
- do wykonywania pionowych otworów w ziemi do głębokości 750 mm
- rama z przekładnią
- wiertło do wyboru (średnica: 150, 200,250, 300, 350, 400 mm) za dopłatą
- ostrze wiertła oraz nakładka części nacierającej wykonane jest ze stali trudno ścieralnej
- Wyposażenie dodatkowe:
wał przegubowo-teleskopowy ze sprzęgłem przeciążeniowym, który zwiększa trwałość i niezawodność przekładni.
Oferta ważna do wyczerpania zapasów. Podana cena jest ceną netto
- for making vertical holes in the ground up to a depth of 750 mm
- frame with gear
- drill bit to choose from (diameter: 150, 200, 250, 300, 350, 400 mm) for an extra charge
- the drill blade and the overlay of the rubbing part are made of hard-abrasive steel
- Additional equipment for an extra charge:
PTO shaft with overload clutch, which increases the durability and reliability of the transmission.
EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last